Table of Contents
Advertisement
Do not use abrasive cleaning components, solvents,
steel wool or other aggressive material to clean the
lenses.
P
T
B
RESERVING
HE
ODYWORK
Washing
●
Wash your vehicle regularly. Always wash your
vehicle in the shade using Mopar® Car Wash, or a
mild car wash soap, and rinse the panels completely
with water.
●
If insects, tar, or other similar deposits have
accumulated on your vehicle, use Mopar® Super
Kleen Bug and Tar Remover to remove.
●
Use a high quality cleaner wax, such as Mopar®
Cleaner Wax to remove road film, stains and to
protect your paint finish. Use precautions to not
scratch the paint.
●
Avoid using abrasive compounds and power buffing
that may diminish the gloss or thin out the paint
finish.
CAUTION!
●
Do not use abrasive or strong cleaning materials
such as steel wool or scouring powder that will
scratch metal and painted surfaces.
●
Use of power washers exceeding 1,200 psi (8,274
kPa) can result in damage or removal of paint and
decals.
Special Care
●
If you drive on salted or dusty roads or if you drive
near the ocean, hose off the undercarriage at least
once a month.
●
It is important that the drain holes in the lower edges
of the doors, rocker panels, and trunk be kept clear
and open.
●
If you detect any stone chips or scratches in the
paint, touch them up immediately.
●
If your vehicle is damaged due to a collision or
similar cause that destroys the paint and protective
coating, have your vehicle repaired as soon as
possible.
●
If you carry special cargo such as chemicals,
fertilizers, de-icer salt, etc., be sure that such
materials are well packaged and sealed.
●
If a lot of driving is done on gravel roads, consider
mud or stone shields behind each wheel.
●
Use Mopar® Touch Up Paint on scratches as soon
as possible. An authorized dealer has touch up paint
to match the color of your vehicle.
INTERIORS
S
A
F
P
EATS
ND
ABRIC
ARTS
Use Mopar® Total Clean to clean fabric upholstery and
carpeting.
SERVICING AND MAINTENANCE
WARNING!
Do not use volatile solvents for cleaning purposes.
Many are potentially flammable, and if used in closed
areas they may cause respiratory harm.
Stain Repel Fabric Cleaning Procedure —
If Equipped
Stain Repel seats may be cleaned in the following
manner:
●
Remove as much of the stain as possible by blotting
with a clean, dry towel.
●
Blot any remaining stain with a clean, damp towel.
●
For tough stains, apply Mopar® Total Clean, or a
mild soap solution to a clean, damp cloth and
remove stain. Use a fresh, damp towel to remove
soap residue.
●
For grease stains, apply Mopar® Multi-Purpose
Cleaner to a clean, damp cloth and remove stain.
Use a fresh, damp towel to remove soap residue.
●
Do not use any harsh solvents or any other form of
protectants on Stain Repel products.
Seat Belt Maintenance
Do not bleach, dye or clean the belts with chemical
solvents or abrasive cleaners. This will weaken the
fabric.
If the belts need cleaning, use a mild soap solution
or lukewarm water. Do not remove the belts from the
vehicle to wash them. Dry with a soft cloth.
203
8
Advertisement
Table of Contents
