Table of Contents
Advertisement
Auto-Down Feature
For windows equipped with the AUTO feature, push the
window switch down to the second detent, release, and
the window will go down automatically.
To stop the window from going all the way down during
the Auto-Down operation, pull up or push down on the
switch briefly.
Auto-Up Feature With Anti-Pinch Protection
For windows equipped with the AUTO feature, lift the
window switch up to the second detent, and release;
the window will go up automatically.
To stop the window from going all the way up during the
Auto-Up operation, push down on the switch briefly.
To close the window part way, lift the window switch
briefly and release it when you want the window to stop.
If the window runs into any obstacle during auto-
closure, it will reverse direction and then go back down.
Remove the obstacle and use the window switch again
to close the window.
NOTE:
Any impact due to rough road conditions may trigger the
auto-reverse function unexpectedly during auto-closure.
If this happens, pull the switch lightly and hold to close
the window manually.
WARNING!
There is no anti-pinch protection when the window
is almost closed. To avoid personal injury be sure to
clear your arms, hands, fingers and all objects from
the window path before closing.
R
A
-U
ESET
UTO
P
Should the Auto-Up feature stop working, the window
may need to be reset.
To reset Auto-Up
Pull the window switch up to close the window
completely and continue to hold the switch up for an
additional two seconds after the window is closed.
HOOD
O
T
H
PENING
HE
OOD
WARNING!
For BEV models: Always place the ignition in the OFF
position before opening the hood. If the ignition is
in the RUN position and the Propulsion System is
active when the hood is opened, the electric motor
could automatically start, and persons not clear of
the vehicle could be injured by the electric motor's
moving parts.
To open the hood, two latches must be released.
1.
Pull the hood release lever located underneath the
driver's side of the instrument panel.
GETTING TO KNOW YOUR VEHICLE
Hood Release
2.
Move to the outside of the vehicle, reach into the
opening beneath the center of the hood and push
the lever toward the passenger side of the vehicle
to fully release the hood.
Hood Safety Latch Lever Location
NOTE:
●
Vehicle must be at a stop and the gear selector must
be in PARK.
●
You may have to push down slightly on the hood
before pushing the safety latch.
53
2
Advertisement
Table of Contents
