Table of Contents
Advertisement
Temperature Control Buttons
These buttons provide temperature control.
Push upward on the driver's side toggle
switch on the faceplate, or press and
slide the temperature bar towards the red
arrow button on the touchscreen for warmer
temperature settings. Push downward the driver's side
toggle switch on the faceplate, or press and slide the
temperature bar towards the blue arrow button on the
touchscreen for cooler temperature settings.
Blower Control
Blower Control is used to regulate the
amount of air forced through the Climate
Control system. There are seven blower
speeds available. Adjusting the blower will
cause automatic mode to switch to manual operation.
The speeds can be selected using either the blower
control button on the faceplate or the buttons on the
touchscreen.
Faceplate
The blower speed increases as you push upward the
blower control button from the lowest blower setting.
The blower speed decreases as you push downward the
blower control button.
Touchscreen
Use the small blower icon to reduce the blower setting
and the large blower icon to increase the blower
setting. Blower can also be selected by pressing the
blower bar area between the icons.
Panel Mode
Air comes from the outlets in the instrument
panel. Each of these outlets can be
individually adjusted to direct the flow of
air. The air vanes of the center outlets and
outboard outlets can be moved up and down or side
to side to regulate airflow direction. There is a shut-off
wheel located below the air vanes to shut off or adjust
the amount of airflow from these outlets.
Bi-Level Mode
Air comes from the instrument panel outlets
and floor outlets. A slight amount of air
is directed through the defrost and side
window demister outlets.
NOTE:
Bi-Level mode is designed under comfort conditions to
provide cooler air out of the panel outlets and warmer
air from the floor outlets.
Floor Mode
Air comes from the floor outlets. A slight
amount of air is directed through the
defrost, side window demister outlets.
Defrost Mode
Air comes from the windshield and side
window demist outlets. Use Defrost mode
with maximum temperature settings for
best windshield and side window defrosting
and defogging.
GETTING TO KNOW YOUR VEHICLE
Mix Mode
Air is directed through the floor, defrost, and
side window demister outlets. This setting
works best in cold or snowy conditions that
require extra heat to the windshield. This
setting is ideal for maintaining comfort while reducing
moisture on the windshield.
Climate Control OFF Button
Press and release the OFF button on the
touchscreen, or push and release the OFF
button on the faceplate to turn the Climate
Control ON/OFF.
A
T
C
UTOMATIC
EMPERATURE
ONTROL
Automatic Operation
1.
Push the AUTO button on the faceplate, or the
AUTO button on the touchscreen on the Automatic
Temperature Control (ATC) Panel.
2.
Next, adjust the temperature you would like the
system to maintain by adjusting the temperature
control buttons. Once the desired temperature is
displayed, the system achieves and automatically
maintains that comfort level.
3.
When the system is set up for your comfort
level, it is not necessary to change the settings.
You experience the greatest efficiency by simply
allowing the system to function automatically.
45
2
(ATC)
Advertisement
Table of Contents
