Wireless Charging Pad - Fiat 500e 2024 Owner's Manual

W C P
IRELESS HARGING AD

Wireless Charging Pad

Your vehicle is equipped with a 15W 3A Qi
charging pad located below the center stack, within the
storage compartment. This charging pad is designed to
wirelessly charge your Qi ® enabled mobile phone. Qi
a standard that allows wireless charging of your mobile
phone.
Your mobile phone must be designed for Qi
charging. If the phone is not equipped with Qi
charging functionality, an aftermarket sleeve or a
specialized back plate can be purchased from your
mobile phone provider or a local electronics retailer.
Please see your phone's Owner's Manual for further
information.
The wireless charging pad is equipped with an anti-slip
mat to hold your mobile phone in place, and an LED
indicator light.
Place the device inside the prepared area delimited in
the mat as shown in the image. Incorrect positioning
will prevent the phone from charging.
LED Indicator Status:
●
No Light: Charging pad is idle or searching for a
device. Device may not be compatible with the Qi
standard.
●
Blue Light: Device is detected and is charging.
●
Red Light/Flashing: Internal error, or foreign object is
detected.
●
Green Light: Device has completed battery charging
(if device is equipped to transmit this information).
Important Notes Regarding This Vehicle's Wireless
Charging Pad:
●
The presence of the Near-Field Communication
(NFC) function active on a smartphone could signal
® wireless
malfunction anomalies.
●
The ignition must be in the ON/RUN position in order
® is
for the phone to charge.
●
To avoid interference with the key fob search, the
wireless charging pad will stop charging when any
® wireless
door or liftgate is opened, even if the engine is
® wireless
running.
●
Be sure to place the mobile device correctly (display
facing upward, and phone not covering the LED) on
the wireless charging pad.
●
If the phone moves on the pad causing the red light
to illuminate, the phone will have to be picked up
and placed back on the charging pad to resume
charging.
●
Wireless charging is not as fast as when the phone
is connected to a wired charger.
GETTING TO KNOW YOUR VEHICLE
●
The phone's protective case must be removed when
placed on the wireless charging pad.
●
Most smartphones are equipped with software to
®
protect the device from overheating. When the
software is active, the rate of charge is slowed down
to protect the device.
●
Phones must always be placed on the wireless
charging pad within the outline shown on the pad
so that its charging parts connect with the charging
coils of the system. Movement of the phone during
charging may prevent or slow the rate of charge.
●
Having multiple applications open on the phone
while charging will reduce the charging efficiency,
and may even shut down an application that is
actively running (i.e. Apple CarPlay
cause the phone to overheat.
●
Wireless chargers may implement certain methods
to prevent the phone from overheating during
charging such as slowing down the rate of charge.
In certain instances, the device may shut down for
a brief period of time (when the device reaches a
certain temperature). If this happens, it does not
mean there is a fault with the wireless charging pad.
This may just be a protective measure to prevent
damage to the phone.
●
The use of multiple wireless functions at the same
time (wireless charging, Apple CarPlay
Auto ™ ) could cause the device to overheat, resulting
in limitation of the functions or it turning off. In
this case, it is recommended to connect the system
using the USB port.
51
2
® ). This may also
® , Android