Changing Engine Oil; Replacing Transmission Oil Filter [Hst Type] - Kubota STW34 Operator's Manual

BChanging Engine Oil
To avoid personal injury or death:
A Be sure to stop the engine before changing the
oil.
A Allow engine to cool down sufficiently, oil can
be hot and can burn.
1. To drain the used oil, remove the drain plug at the
bottom of the engine and drain the oil completely into
the oil pan.
2. After draining reinstall the drain plug.
3. Fill with the new oil up to the upper notch on the
dipstick.
(See "LUBRICANTS, FUEL AND COOLANT" in
"MAINTENANCE" section.)
Oil capacity with filter
(1) Oil inlet (A) Oil level is acceptable within this range
(2) Dipstick
(1) Drain plug
STW34 5.7 L
STW37, STW40 6.7 L
BReplacing Transmission Oil Filter [HST
Type]
To avoid personal injury or death:
A Be sure to stop the engine before changing the
oil filter cartridge.
A Allow engine to cool down sufficiently, oil can
be hot and can burn.
1. Remove the drain plugs at the bottom of the
transmission case and drain the oil completely into the
oil pan.
2. After draining reinstall the drain plugs.
(1) Drain plugs
PERIODIC SERVICE 79