Table of Contents
Advertisement
BCheck Chains
Remove the snap pin and adjust the turnbuckle to control
horizontal sway of the implement.
After adjustment, re-set the snap pin.
(1) Turnbuckle
(2) Snap pin
BLower link holder
When operating the tractor without a 3-point hitch
implement, it is necessary to lock the lower links to
prevent them from hitting the tractor rear wheels.
3-POINT HITCH & DRAWBAR
DRAWBAR
To avoid personal injury or death:
A Never pull from the top link, the rear axle or any
point above the drawbar. Doing so could cause
the tractor to tip over rearward causing
personal injury or death.
(1) PTO shaft
(2) Drawbar
(3) Pivot pin
A The drawbar was tested and approved in accordance
with the EEC Directive 89/173 Annex 4 dynamic
method.
EEC Approved No.
Value of D
Vertical Load, S
FRONT HITCH
(1) Front hitch
43
D e1 0029
14.2 kN
500 daN
Advertisement
Table of Contents
