Every 50 Hours; Lubricating Grease Fittings; Oiling - Kubota STW34 Operator's Manual

EVERY 50 HOURS

BLubricating Grease Fittings
Apply a small amount of multipurpose grease to the
following points every 50 hours:
If you operated the machine in extremely wet and muddy
conditions, lubricate grease fittings more often.
(1) Grease fitting (Pedal shaft)
(1) Grease fitting (Top link)
(2) Grease fitting (Lifting rod) [RH]
(1) Battery terminals
(1) Grease fitting (Cruise control lever)
BOiling
To avoid personal injury or death:
A Be sure to stop the engine and remove the key
before oiling.
(1) Hand throttle cable
(2) Accelerator cooperative cable
PERIODIC SERVICE 71