Do you have a question about the T1880 and is the answer not in the manual?
Questions and answers
David Wisely
April 24, 2025
I need a picture of where the belt goes around the correct pulleys on the deck
1 comments:
Mr. Anderson
May 12, 2025
The belt goes around the pulleys on the deck so that the flat side of the belt contacts flat pulleys, and the V side of the belt fits into the V-shaped pulleys. You can use the parts diagrams, such as Diagram D73000, to help determine the exact routing. Looking at pulley shapes can also guide proper belt placement.
Need help?
Do you have a question about the T1880 and is the answer not in the manual?
Questions and answers
I need a picture of where the belt goes around the correct pulleys on the deck
The belt goes around the pulleys on the deck so that the flat side of the belt contacts flat pulleys, and the V side of the belt fits into the V-shaped pulleys. You can use the parts diagrams, such as Diagram D73000, to help determine the exact routing. Looking at pulley shapes can also guide proper belt placement.
This answer is automatically generated