Kubota STW34 Operator's Manual page 27

B Tightening Bolts and Nuts
Tighten all bolts and nuts in the following order to the
required torque.
A Before finally tightening all mounting hardware, start
the engine and apply down pressure to the bucket until
the loader raises the front wheels slightly, and make
sure that the mounting pins can be rotated easily.
Tighten all bolts and nuts in this position.
Location Ref. No.
(1)
Main frame (2)
(3)
(4)
Sub frame (5)
(6)
B Other Implements
A For selecting implements, consult your local dealer.
A Strictly follow the instructions outlined in the operator's manual of the mounted or trailed machinery or trailer, and do
not operate the combination tractor - machine or tractor - trailer unless all instructions have been followed.
A Forestry Application
Following hazards exist;
(a) toppling trees, primarily in case a rear-mounted tree grab-crane is mounted at the rear of the tractor;
(b) penetrating objects in the operator's enclosure, primarily in case a winch is mounted at the rear of the tractor.
Optional equipments such as OPS (Operator Protective Structure), FOPS (Falling Object Protective Structure), etc. to
deal with these hazards and other related hazards are not available for this tractor. Without such optional equipment
use is limited to tractor specific applications like transport and stationary work.
Required Torque
Bolt
N-m (kgf-m)
6-M16 200 (20.2)
8-M14 132 (13.3)
8-M14 100 (10.1)
8-M14 132 (13.3)
4-M14 132 (13.3)
4-M12 57 (5.8)
IMPLEMENT LIMITATIONS
C OUTPUT CAPACITY
Max. Lifting Capacity 425 kg
Max. Oil Pressure 17.15 MPa (175 kgf/cm )
To avoid personal injury or death:
A Special attention should be made when lifting
the load, keep the bucket correctly positioned
to prevent spillages.
A Not all risks are listed.
Refer to front loader operator's manual.
7