54
CAB OPERATION
BRear Window Half-Lock
1. Grip the rear window handle and slightly open the rear
window.
2. Adjust the half-lock bracket to the set position.
3. Move back the rear window a little and get the rear
window handle locked.
(1) Rear window
(2) Rear window handle
A When handling the half-lock mechanism, hold up the
window just before being positioned and then slowly
get it in position.
A Be careful not to travel the machine in the half-lock
mode on rough roads.
BEmergency Exit
1. Open the right door of the cab if the left door is
blocked, and vice versa in an emergency situation.
2. Exit through rear window if CAB doors are blocked in
an emergency situation.
DOME LIGHT
BDome Light
Sliding the dome light switch will give the following light
condition:
OFF ...............
The light does not turn on when the
door is opened.
DOOR ...........
The light turns on when the door is
opened. It turns off when the door is
closed.
ON ................
The light remains on regardless of the
door position.
(A) Half-lock bracket
(Storage position)
(B) Half-lock bracket
(Set position)
(C) "LOCK"
(D) "UNLOCK"
(1) Dome light
(2) Dome light switch
A The battery will discharge if the dome light remains on.
Be sure to check the dome light switch position and/or
door closure.
WORK LIGHT
BWork Light Switch
Turn on the key switch and press the top half of the work
light switch. The work light and the switch's indicator light
up. Press the bottom half of the work light switch to turn
off the light and indicator.
(1) Front work light switch
(2) Rear work light switch
(A) "OFF"
(B) "DOOR"
(C) "ON"
(A) Indicator for work lights