Every 500 Hours; Changing Engine Oil - Kubota M100GX-II Operator's Manual

(1) Element
(2) Magnet
(3) Gasket
(4) Cover
(5) Nut

EVERY 500 HOURS

BChanging Engine Oil
To avoid personal injury or death:
A Be sure to stop the engine before changing the
oil.
A Allow engine to cool down sufficiently, oil can
be hot and can burn.
1. To drain the used oil, remove the drain plug at the
bottom of the engine and drain the oil completely into
the oil pan.
All the used oil can be drained out easily when the
engine is still warm.
2. After draining reinstall the drain plug.
3. Fill with the new oil up to the upper notch on the
dipstick.
(See "LUBRICANTS" in "MAINTENANCE" section.)
Tractor model
M100GX-II, M110GX-II
M128GX-II, M135GX-II
A Use DPF-compatible oil (CJ-4) for the engine.
(A) "TIGHTEN"
(B) "LOOSEN"
(C) Pin
"Tighten the cover until the end
of the slot contacts the pin."
Oil capacity with filter
10.5 L
14.6 L
PERIODIC SERVICE
(1) Oil inlet (A) Oil level is acceptable within this range
(2) Dipstick
(1) Drain plug
143