Table of Contents
Advertisement
10
Mechanical installation
Note! Consider all power wire entry locations and signaling wires before preparing back plate.
Please do not touch the PCB during installation to prevent static breakdown.
10.1
PUSH arm system
1. PUSH arm
2. Mount the backplate
Note! Screw head must be flush
with backplate surface.
3. Mount the operator
1022077-en-4.0
Shaft extension
Reveal
Reinforced concrete
Wood
Issue 2023-01-17
Metal
(Min. 4x)
M5x55 (4x)
Note! The direction of the arrow on
the operator should be same as
opening rotation direction.
10 Mechanical installation
Installation movie
DIN Left
Note! The mark on the
back plate must be in
line with CL pivot.
23
Advertisement
Table of Contents
