Learn - Assa Abloy SW60 Installation And Service Manual

Swing door operator

Hide thumbs Also See for SW60:

Table of Contents

12 Start-up

12.2.3

Learn

Must learn before start up.

Note! Before pressing Learn button, make sure that "Bluetooth" and "Location" on your mobile phone is opened.

* When press the Learn button on CU for concealed installation, must push the door leaf to the opening position

more than 45°.

** Scan the QR code on the label that is in the package for concealed installation.

*** Lock with power: Lock the door with power.

**** Lock without power: Lock the door without power.

Note! If any issues with learning or could not connect to the door after learning, please check the connection

of mains power, installation of the unit or the arm system, then restart learning again.

Note! If any of the parameters SPRING PRE-TENSION are changed after performing a learn, a new learn must be

carried out (Not for Concealed installation).

* Press Learn button on CU for

** Scan QR code on the label that

more than 4 seconds.

attached to the flat cable of CU.

Please don't remove the

QR code label.

Issue 2023-01-17

1022077-en-4.0

Table of Contents