6
How the ASSA ABLOY SW60 works
The swing door operator ASSA ABLOY SW60 uses a motor which is connected to the output shaft.
The arm system that is connected to the output shaft opens the door.
6.1
Door mode functionality
6.1.1
HOLD/AUTO/OFF switch
Function
HOLD
AUTO
OFF
6.2
Modes and functions on app
6.2.1
Wireless controlling
The door can be controlled by the app on a smartphone or a tablet.
6.2.2
Off / Closed
The door is closed. The door cannot be opened with the inner / outer wall or jamb-mounted contact
switches. The door is locked if an electromechanical locking device has been fitted.
6.2.3
Exit
Passage from inside only. The door is normally locked if an electromechanical locking device has
been fitted. The door can only be opened with the inner wall or jamb-mounted contact switches
(if fitted), or by a signal to the Key Impulse.
6.2.4
Auto
The door can be opened with the inner / outer wall or jamb-mounted contact switches. Electromech-
anical locking device will be released when door is closed.
6.2.5
Hold / Parking
The door can be held at any position when opening or closing. The door will not react on impulses,
"push and go" or "push and close".
1022077-en-4.0
Program
The door can be held at any position when opening or closing.
Impulses from activation units connected to inner impulse or outer impulse will ini-
tiate a door open cycle. The door can be opened with the inner / outer wall or jamb-
mounted contact switches.
Only KEY Impulse can open the door.
Issue 2023-01-17
6 How the ASSA ABLOY SW60 works
13