10.2
PULL arm system
1. PULL arm
Note! Arm sliding track must be mounted at the top of the door and the back plate at the Z-measurement
from top of the door.
2. Mount the backplate
Reinforced concrete
3. Mount the operator
1022077-en-4.0
Shaft extension
Reveal
Wood
Metal
(Min. 4x)
M5x55 (4x)
Issue 2023-01-17
10 Mechanical installation
Installation movie
Note! Screw head must be flush
with backplate surface.
Note! The mark on the
back plate must be in
line with CL pivot.
Note! The direction of the arrow on
the operator should be same as
opening rotation direction.
DIN Right
27