Table of Contents
Advertisement
Chapter 6
4
Click
Add
to set the
Note:
1. Make sure that the time of the mesh device is correct before using this function. For details, refer to
2. The wireless LED will turn off if the corresponding wireless network is disabled.
3. The wireless network will be automatically turned on after the time period you set.
6 8
Use WPS for Wireless Connection
You can use WPS (Wi-Fi Protected Setup) to add a new wireless device to your existing
network quickly and easily.
Method 1: Use the WPS button
Use this method if your client device has a WPS button.
1
Press the WiFi/WPS button of the mesh device.
2
Press the WPS button of the client device directly.
3
The WPS LED flashes for about 2 minutes during the WPS process.
Wireless Off
Time, and click
Customize Your Network Settings
Save
to make the settings effective.
Set System
Time.
66
Advertisement
Table of Contents
