Table of Contents
Advertisement
Chapter 2
2 1
Position the Device
• The device should not be located in a place where it will be exposed to moisture or
excessive heat.
• Place the device in a location where it can be connected to multiple devices as well as
to a power source.
• Make sure the cables and power cord are safely placed out of the way so they do not
create a tripping hazard.
• Keep the device away from devices with strong electromagnetic interference, such
as Bluetooth devices, cordless phones and microwaves.
• The device can be placed on a shelf or desktop.
Generally, the device is placed on a horizontal surface, such as on a shelf or desktop.
The device also can be mounted on the wall as shown in the following image.
NOTE:
4.67 mm < D < 9.85 mm
d < 4.5 mm
H < 3 mm
4.8 mm < N
20 mm ≤ M
Note:
The diameter of the screw should be between 4.67 mm and 9.85 mm, and the center distance of two screws is 40 mm.
The screws should be at least 20 mm in length to hold the device, and the screw head raised above the wall surface
should be about 4.8 mm.
2 2
Connect Your Device
If you want to set up this device as a regular router or as the Main AP for Mesh Wi-Fi
system, follow the steps below to connect your device.
Connect the Device
40
3
1.8
n 4.5
n 10
7
Advertisement
Table of Contents
