Table of Contents
Advertisement
Chapter 15
To use the VPN feature, you need to set up IPSec VPN Server on your mesh device, and
configure theIPSec connection on remote devices. Please follow the steps below to set
up the IPSec VPN connection.
Home Network Mesh Device (VPN Server)
Step 1 Set up IPSec VPN Server on Your Mesh Device
1. Visit
http://tplinkwifi.net
password you set for the mesh device.
2. Go to
Advanced
>
Note:
•
Firmware update may be required to support IPSec VPN Server.
•
Before you enable
Dead Peer
assign a static IP address for mesh device's WAN port and synchronize your
3. Click Add.
4. Configure the IPSec VPN server parameters.
or http://192.168.88.1, and log in with your TP-Link ID or the
VPN
>
IPSec
VPN, and enable
Detection, we recommend you configure Dynamic DNS Service (recommended) or
INTERNET
Remote Devices
Dead Peer
Detection.
System Time
VPN Server&Client
with internet.
118
Advertisement
Table of Contents
