Table of Contents
Advertisement
Chapter 16
¾ To run ping and traceroute tools:
1 ) Locate the
Diagnostic Tools
2 ) Select
Ping
connectivity.
•
Ping
is used to test the connectivity between the mesh device and the tested
host, and measure the round-trip time.
•
Traceroute
is used to display the route (path) your mesh device has passed to
reach the tested host, and measure transit delays of packets across an internet
Protocol network.
•
Nslookup
is used to queries the Domain Name System (DNS) to obtain the
mapping between a domain name and IP address, or other DNS records.
3 ) Enter the
Target IP Address/Domain Name
the default test options if necessary.
section.
or
Traceroute
or
Nslookup
Manage Your Mesh Device
as the diagnostic tool to test the
of the tested host. You can change
130
Advertisement
Table of Contents
