Table of Contents
Advertisement
Chapter 6
4
When the WPS LED is on, the client device has successfully connected to the mesh
device.
Method 2: Use the "Connect" button on the web management page
Use this method if your client device has a WPS button.
1
Visit
http://tplinkwifi.net
set for the mesh device.
2
Go to
Advanced
3
Click
Connect
on the page.
4
Press the WPS button of the client device directly.
5
The WPS LED of the mesh device flashes for about 2 minutes during the WPS
process.
6
When the WPS LED is on, the client device has successfully connected to the mesh
device.
Method 3: Enter the mesh device's PIN on your client device
Use this method if your client device asks for the mesh device's PIN.
1
Visit
http://tplinkwifi.net
set for the mesh device.
2
Go to
Advanced
3
Take a note of the current PIN of the mesh device. You can also click the
button to get a new PIN.
or http://192.168.88.1, and log in with the password you
>
Wireless
>
WPS
page.
or http://192.168.88.1, and log in with the password you
>
Wireless
> WPS, and enable
Customize Your Network Settings
Mesh Device's
PIN.
Generate
67
Advertisement
Table of Contents
