Table of Contents
Advertisement
Chapter 16
3 ) Click
Save
to make the settings effective.
Some settings of the mesh device may take effect only after rebooting, including:
• Change the LAN IP Address (system will reboot automatically).
• Change the Operation Mode (system will reboot automatically).
• Upgrade the firmware of the mesh device (system will reboot automatically).
• Restore the mesh device to its factory defaults (system will reboot automatically).
• Update the configuration with the file (system will reboot automatically).
Note:
The Auto Reboot feature takes effect based on the mesh device's system time. Please make sure you have already set
up the time of the mesh device.
16 7
Administration Management
16 7 1
Change the Login Password
A login password is required to log in to the mesh device's web management page.
You are asked to set a login password at first login. You can change it with the account
management feature.
1
Visit
http://tplinkwifi.net
set for the mesh device.
2
Go to
Advanced
Management
section.
or http://192.168.88.1, and log in with the password you
>
System Tools
> Administration, and locate the
Manage Your Mesh Device
Account
134
Advertisement
Table of Contents
