Table of Contents
Advertisement
Chapter 16
3
Enter the old password and a new password twice (both case-sensitive).
4
Click
Save
to make the settings effective.
16 7 2
Local Management
You can control the local devices' authority to manage the mesh device via Local
Management feature. By default all local connected devices are allowed to manage the
mesh device. You can also specify one device to manage the mesh device and enable
local management over a more secure way, HTTPS.
Follow the steps below to allow only the specific device to manage the mesh device via
the local management over HTTPS.
1
Visit
http://tplinkwifi.net
set for the mesh device.
2
Go to
Advanced
section.
3
Enable
Local Management over HTTPS
HTTPS
as the default settings. Enter the
device to manage the mesh device.
4
Click Save.
Now, you can manage the mesh device over both HTTP (http://tplinkwifi.net) and HTTPS
(https://tplinkwifi.net).
or http://192.168.88.1, and log in with the password you
>
System Tools
> Administration, and locate the
Manage Your Mesh Device
and keep the
Port for HTTP
IP address
or
MAC address
Local Management
and
Port for
of the local
135
Advertisement
Table of Contents
