Table of Contents
Advertisement
Chapter 6
6 1 3
Reserve LAN IP Addresses
You can view and add a reserved address for a client. When you specify an IP address
for a device on the LAN, that device will always receive the same IP address each time
when it accesses the DHCP server. If there are some devices in the LAN that require
permanent IP addresses, please configure Address Reservation on the mesh device
for the purpose.
Follow the steps below to reserve an IP address for your devices.
1
Visit
http://tplinkwifi.net
set for the mesh device.
2
Go to
Advanced
3
Scroll down to the
reservation entry for your device.
4
Enter the
MAC Address
5
Specify the
IP address
6
Select the
Enable This Entry
6 2
Configure IPv6 LAN Settings
Based on the IPv6 protocol, the mesh device provides two ways to assign IPv6 LAN
addresses:
• Configure the RADVD (Mesh Device Advertisement Daemon) address type
• Configure the DHCPv6 Server address type
or http://192.168.88.1, and log in with the password you
>
Network
>
LAN Settings
Address Reservation
of the device for which you want to reserve IP address.
which will be reserved by the mesh device.
check box and click
Customize Your Network Settings
page, and select IPv4.
section, and click
Add
OK
to make the settings effective.
to add an address
52
Advertisement
Table of Contents
