Table of Contents
Advertisement
Chapter 6
3
Click
Save
to make the settings effective.
¾ To enable network roaming:
Network roaming helps devices choose better AP based on actual conditions to balance
network demands. (For mesh devices, Band Steering is disabled by default.)
1
Go to
Advanced
2
Locate the
Band Steering
effective.
6 6 2
Advanced Wireless Settings
Advanced wireless settings are for those who want more network controls. You can
follow the instructions below to configure your mesh device.
1
Visit
http://tplinkwifi.net
set for your mesh device.
2
Go to
Advanced
¾ To change basic advanced settings:
Locate the
Advanced Settings
to the explanation below, and then click Save.
•
Beacon Interval:
Enter a value between 40 and 1000 in milliseconds to determine
the duration between which beacon packets are broadcast by the mesh device to
synchronize the wireless network. The default is 100 milliseconds.
>
Wireless
>
Wireless
section, select the
or http://192.168.88.1, and log in with the password you
>
Wireless
>
Advanced
section and configure the advanced settings according
Customize Your Network Settings
Settings.
Enable
check box to make the settings
Settings.
61
Advertisement
Table of Contents
