Product Overview; Appearance - TP-Link HX220 1 pz User Manual

Chapter 1
1 1

Product Overview

The Whole Home Mesh Wi-Fi AP is designed to extend your network coverage. You can
use multiple APs to create a seamless, intelligent and easy-to-configure mesh network
that covers the entire home.
The Mesh Wi-Fi system consists of a Main AP, one or more agents. The Main AP connects
to a wired router, a modem or gateway, the agents extend the wireless coverage of your
network.
1 2

Appearance

The device has an LED that changes its behavior according to its working status, and a
WPS button, three RJ-45 Ethernet ports, a power port, and a RESET button.
Note: The appearance of the product is for illustration only, it may be different from your device, please refer to the
actual product.
You can check the device's working status by following the LED Explanation table.
LED Explanation
Status
Flashing yellow
Yellow
Flashing blue
Fast flashing blue
Blue
Flashing white/green
White/green
Flashing red
WPS button
Status LED
Indication
The device is starting up or resetting.
The connection quality of the device is normal.
The device is ready for setup.
The device is establishing a WPS or mesh connection.
The device has been set up, but the internet is unavailable.
The device is upgrading the firmware.
The device is all set up and connected to internet.
The device has lost connection.
Get to Know About Your DeviceDevice
Power slot
WAN/ LAN Ports
LAN Port
Reset Button
4