Table of Contents
Advertisement
FAQ
Q1 What should I do if I forget my wireless password?
The default wireless password is printed on the label of the mesh device. If the password
has been altered:
1. Connect your computer to the mesh device using an Ethernet cable.
2. Visit
http://tplinkwifi.net
password you set for the mesh device.
3. Go to
Wireless
to retrieve or reset your wireless password.
Q2 What should I do if I forget my web management password?
• If you are using a TP-Link ID to log in, or you have enabled the Password Recovery
feature of the mesh device, click
the instructions to reset it.
• Alternatively, press and hold the
LED blinks to restore factory default settings, and then visit
http://192.168.88.1
Note:
• You'll need to reconfigure the mesh device to surf the internet once the mesh device is reset, and please mark down
your new password for future use.
Q3 What should I do if I can't log in to the mesh device's web management
page?
This can happen for a variety of reasons. Please try the methods below to log in again.
• Make sure your computer is connected to the mesh device correctly and the
corresponding LED indicator(s) light up.
• Make sure the IP address of your computer is configured as
automatically
and
• Make sure
http://tplinkwifi.net
• Check your computer's settings:
1 ) Go to
Start
status and
tasks.
2 ) Click
Internet Options
3 ) Click
Connections
or http://192.168.88.1, and log in with your TP-Link ID or the
Forgot password
Reset
to create a new login password.
Obtain DNS server address
or
http://192.168.88.1
>
Control Panel
>
on the bottom left.
and select
Never dial a
on the login page and then follow
button of the mesh device until the Power
automatically.
is correctly entered.
Network and
Internet, and click
connection.
http://tplinkwifi.net
Obtain an IP address
View network
145
or
Advertisement
Table of Contents
