Table of Contents
Advertisement
Chapter 16
3
Specify the ICMP Ping reply options.
•
Remote:
Select it if you want the computers on a public network to ping the
mesh device's WAN IP address.
•
Local:
Enabled by default, if enabled, the computers on a private network can
ping the mesh device's LAN IP address.
4
Click
Save
to make the settings effective.
16 7 6
Session ID
When Session ID function is enabled, it will be saved into Flash every time the PPP
connection is updated. This can prevent some problems of PPPoE/L2TP/PPTP
connection being rejected to reconnect to servers when the device is powered off or
the network disconnect accidentally.
1
Visit
http://tplinkwifi.net
set for the mesh device.
2
Go to
Advanced
3
Enable the
Update Session ID
16 8
System Log
System Log can help you know what happened to your mesh device, facilitating
you to locate the malfunctions. For example when your mesh device does not work
properly, you may need to save the system log and send it to the technical support for
troubleshooting.
1
Visit
http://tplinkwifi.net
set for the mesh device.
2
Go to
Advanced
or http://192.168.88.1, and log in with the password you
>
System Tools
> Administration, and locate the
and Click
or http://192.168.88.1, and log in with the password you
>
System Tools
>
System Log
Manage Your Mesh Device
Save
to make the settings effective.
page.
Session ID
section.
138
Advertisement
Table of Contents
