Table of Contents
Advertisement
Chapter 6
4
Enter the mesh device's PIN on the client device. (The default PIN is also printed on
the label of the mesh device.)
5
The WPS LED flashes for about 2 minutes during the WPS process.
6
When the WPS LED is on, the client device has successfully connected to the mesh
device.
Note:
1. The WPS LED on the mesh device will light on for five minutes if the device has been successfully added to the
network.
2. The WPS function cannot be configured if the wireless function of the mesh device is disabled. Please make sure the
wireless function is enabled before configuring WPS.
Method 4: Enter the client device's PIN on the mesh device
1
Visit
http://tplinkwifi.net
set for the mesh device.
2
Go to
Advanced
3
Enter the
Client's
4
Then click the
Connect
5
Device has been added successfully!
web page, which means the client device has successfully connected to the mesh
device.
or http://192.168.88.1, and log in with the password you
>
Wireless
> WPS, and click
PIN.
button.
Customize Your Network Settings
PIN
Number.
or the similar information will appear on the
68
Advertisement
Table of Contents
