Table of Contents
Advertisement
Chapter 6
1 ) Select
DHCPv6 Server
IPv6 addresses to hosts.
2 ) Specify the
device will generate IPv6 addresses within the specified range.
3 ) Keep
Address Lease Time
4 ) Keep
Site Prefix Type
specific IPv6 site prefix, select
5 ) Keep
WAN Connection
4
Click
Save
to make the settings effective.
6 3
Set Up a Dynamic DNS Service Account
Most ISPs (Internet service providers) assign a dynamic IP address to the mesh device
and you can use this IP address to access your mesh device remotely. However, the
IP address can change any time and you don't know when it changes. In this case, you
might need the DDNS (Dynamic Domain Name Server) feature on the mesh device to
allow you and your friends to access your mesh device and local servers (FTP, HTTP,
etc.) using domain name, in no need of checking and remembering the IP address.
Note: DDNS does not work if the ISP assigns a private WAN IP address (such as 192.168.1.x) to the mesh device.
To set up DDNS, please follow the instructions below:
1
Visit
http://tplinkwifi.net
set for the mesh device.
2
Go to
Advanced
3
Select the
Service Provider
as the address type to make the mesh device assign
Starting/Ending IPv6 Address
as the default setting.
as the default value Delegated. If your ISP has provided a
Static
as the default setting.
or http://192.168.88.1, and log in with the password you
>
Network
>
Dynamic
(TP-Link/Dyndns/NO-IP).
Customize Your Network Settings
for the IPv6 suffixes. The mesh
and enter the prefix.
DNS.
54
Advertisement
Table of Contents
