Table of Contents
Advertisement
Chapter 16
16 2
Control the LED
The LED of the mesh device indicates its activities and status. You can enable the Night
Mode feature to specify a time period during which the LED is off.
1. Visit
http://tplinkwifi.net
password you set for the mesh device.
2. Go to
Advanced
>
3. Enable
Night
Mode.
4. Specify the LED off time, and the LED will be off during this period every day.
5. Click SAVE.
16 3
Test Internet Connectivity
Diagnostics function is used to test the connectivity between the mesh device and the
host or other network devices.
1
Visit
http://tplinkwifi.net
set for the mesh device.
2
Go to
Advanced
¾ To test the internet connection of the mesh device:
Locate the
Diagnostic Tools
and you will find the test results in the gray box.
or http://192.168.88.1, and log in with your TP-Link ID or the
System
>
LED
Control.
or http://192.168.88.1, and log in with the password you
>
System Tools
>
Diagnostics
section, and click the
Manage Your Mesh Device
page.
Start
to test the internet connectivity
129
Advertisement
Table of Contents
