Table of Contents
Advertisement
Chapter 9
Channel Width:
Select the channel width from the drop-down list. The default setting is
Auto, which can adjust the channel width for your clients automatically.
Transmit Power:
Select Low, Middle, or
default and recommended setting is High.
9. 3. 2.
Use WPS for Wireless Connection
You can use WPS (Wi-Fi Protected Setup) to add a new wireless device to your existing
network quickly and easily.
Method 1: Use the WPS button
Use this method if your client device has a WPS button.
1. Press the Sync button of the Controller.
2. Press the WPS button of the client device directly.
3. The Sync LED flashes for about 2 minutes during the WPS process.
4. When the Sync LED is on, the client device has successfully connected to the
Controller or the .
Method 2: Use the WPS button on the web management page
Use this method if your client device has a WPS button.
1. Visit http://tplinkwifi.net, and log in with the password you set for the Controller.
2. Go to
Settings
>
3. Click
Push
Button.
4. Press the WPS button of the client device directly.
5. The Sync LED of the Controller flashes for about 2 minutes during the WPS process.
6. When the Sync LED is on, the client device has successfully connected to the
router.
Method 3: Enter the router's PIN on your client device
Use this method if your client device asks for the router's PIN.
1. Visit http://tplinkwifi.net, and log in with the password you set for the Controller.
2. Go to
Settings
>
Wireless
>
WPS.
Wireless
>
WPS.
High
to specify the data transmit power. The
Customize Your Network
55
Advertisement
Table of Contents
