Installation - Electrolux 6 Series Service Manual

1.2 Installation

Remove the external film. If necessary use a cutter
blade.
Take off the cardboard cover and remove the corner
elements.
Remove the polystyrene base and set the tumble
dryer in position.
ATTENZIONE
The tumble dryer weighs approximately 60 kg.
Adjust the four feet so that the appliance is installed
perfectly level (using a spirit level), to allow for the
correct flow of condensation water into the purpose-
provided tank.
ATTENZIONE
The feet must never be removed. A gap must always
be left between the bottom of the tumble dryer and
the floor to prevent the appliance from overheating.
Technical Support - A.D.L. 6/66 599 74 32-54 Rev.01