Parfomning Installation Cycle Шаша Шаша Аншы 18 7 Preps Qoo - Electrolux EWED65HSS Installation Instructions Manual

18 Installation Instructions
A, WARNING = NOTE
On gas dryers, before the burner will light, ЇЇ Is
FIRE HAZARD necessary Tor the gas ling to be bled of air. Ifthe
Before operating the dryer, make sure the dryer bumer does not light within 45 seconds the first
area I5 clear and free of combustible materials, time tne dryer 15 turned on, the safety switch will
gasoline, and other Tlammable vapors. Also shut the burner off. If this happens, press cancel
see that nothing (such as boxes, clothing, etc.) and wait 5 minutes before making another
obstructs the flow of combustion and ventilation аг. attempt to папі.
Performing Installation Cycle
If your dryer has this consola:
1.Empty the dryer drum.
2. After you plug In tha dryer the first time: wake up the dryer by pressing any button, rotate cycle knob
to touch up cycle, press tha start button and than the cancel button.
3. Wake up the dryer agaln by pressing any button, than Immediately and simultaneously press and hold
both the sanitize and my favorite buttons for 5 seconds, or until the LOD display changes.
4.Tha LCD window will display FISTRE СУСЕ and show estimated time of сусе completion. Press tha
start button. The Installation Cycle will automatically test Tor correct cord connection jon elactric mod-
els) and presence of gas supply (оп gas models). At cycle completion, tha LCD window may display
INSTAL PRASSI, meaning your new dryer Is properly Installed and ready for use. Ir it prompts an action
auch as SERVICE CORD, AO GAS or CALL SERVICE B77 435 Зове, review the Installation steps and make the
necessary comectlons before you attempt to use the dryer.
5. Your dryer will exit the Installation Cycle and return to normal operation the next time you wake It up.
= NOTE
Dryer will stay awake Tor 3 minutes after the Installation Сусе, If you wish to
Immediately run the dryer through a drying сусе, press the cancel button to put tna
unit to sleep and then rewake It immediately ta continue the normal operating mode.
6.Pleass read the Use & Care Guide and enjoy your naw premium dryer!
If your dryer has this consola:
© ==:
1. After you plug In tha dryer the first time: wake up the dryer by pressing any button and follow the
prompts on the LOD Usar mternaca, Including language selection.
2. The Installation Cycle will automatically test Tor correct cord connection (on electric models), pras-
ence of gas supply (on gas models) and free flow of exhaust vent. At cycle completion, the LOD usar
Interface may display IHSTRE PASSI, meaning your new dryer Is propery Installed and ready for usa. If
It prompts an action such as SERVICE CORD, MO GAS or CALL SERUCE 877 436 3287, review the Installation
steps and make the necessary comectlons before you attempt to use the dryer.
3. Your dryer will exit the Installation Cycle and return to normal operation the next time you wake It up.
= NOTE
Dryer will stay awake Tor 3 minutes after the Installation Сусе, If you wish to
Immedciatehy run the dryer through а drying cycle, press the cancel button to put the
unit to sleep and then rewake It immediately to continue tne normal operating moda.
4.Please read the Use & Care Guide and enjoy your naw premium dryer!