6.8 Door
To remove the dryer door, irrespective of whether
it is a plastic dummy door or in transparent glass,
proceed as follows:
Unscrew the 2 screws that hold the door to
the front.
Lift up slightly so that the hook unhooks and
remove it.
ATTENZIONE
Caution: the glass door weighs
approximately 4.5 kg
6.8.1 Plastic door handle, latch and hinge
Unscrew the 8 perimetral screws on the door
and remove the internal cover.
Using a screwdriver and taking care not to
damage the frame, remove the door U joint.
Loosen the 2 screws securing the hinge and
remove it.
Pull out the pin securing the hinge and latch
and remove them.
Technical Support - A.D.L.
33/66
599 74 32-54 Rev.01