Download  Print this page

Electrolux T4130 Operating Manual

Compass control tumble dryers
Hide thumbs

Advertisement

Operating manual
Tumble dryers
T4130, T4190
Type N1130, N1190
Compass Control
Operating manual in original language
487 05 41 31/EN
2010.06.15

Advertisement

Table of Contents
loading

  Summary of Contents for Electrolux T4130

  • Page 1 Operating manual Tumble dryers T4130, T4190 Type N1130, N1190 Compass Control Operating manual in original language 487 05 41 31/EN 2010.06.15...
  • Page 3: Table Of Contents

    Contents Contents Safety instructions ..................5 General ......................7 Control panel ................... 7 Control knob .................... 7 Display ..................... 8 Drying program .................... 9 Drying functions ..................10 Start ....................... 10 Stop ....................... 10 Changing drying program after starting ..........10 Handling ......................11 Starting with preset button ..............11 Starting with control knob ................
  • Page 5: Safety Instructions

    Safety Precautions Safety Precautions Do not dry unwashed items in the machine The machine is not to be used if industrial chemicals have been used for cleaning. Do not allow minors to use the machine. Do not hose down the machine with water. The machine's door lock must under no circumstances be bypassed.
  • Page 7: General

    General General Control Panel The control panel is used to choose the drying program with options and to start and stop the machine. The panel houses a control knob and a display. Some machines also have two preset buttons. Control knob Preset buttons Display Control knob...
  • Page 8: Display

    General Display The display presents the drying programs and additional functions. The up and down arrows on the right-hand side of the display indicate that there are more options available in the current EXTRA DRY menu. Turn the knob for next program. Note! If there is not enough room to show all the text on the display, the first part will be dis-...
  • Page 9: Drying Program

    General Drying Program The machine is programmed with a number of programs adapted to the range of uses to which the machine is intended. EXTRA DRY The following drying programs can be available: Drying program EXTRA DRY.* Drying program DRY.* Drying program IRON DRY 5 %.* IRON DRY 5% * Automatic program controlled by Residual...
  • Page 10: Drying Functions

    General Drying Functions START EXTRA DRY Turn the control knob to the START row. Press HIGH TEMP START the knob to start the selected program. CHANGE TEMPERATURE STOP Press the control knob to stop the program. Restart the drying program by pressing the control knob again.
  • Page 11: Handling

    Handling Handling Starting with preset button •­ Press­the­preset­button­for­the­desired­pro- gram. •­ If­the­machine­has­a­coin­meter,­insert­the­ correct amount of coins/tokens and press the button in order to start. •­ If­the­machine­is­in­a­booking­system­it­will­be­ necessary to book the machine in a central system before it is possible to start it. Note! Pushing one of these buttons will activate the corresponding drying program directly and...
  • Page 12: Starting With Control Knob

    Handling Starting with control knob •­ Select­the­desired­drying­program­with­the­ control­knob­and­confirm­by­pressing­the­ knob. EXTRA DRY •­ Turn­knob­clockwise­to­change­drying­tem- perature. •­ Press­knob­and­select­desired­temperature:­ HIGH (70 °C), MEDIUM (60 °C) or LOW (50 °C). •­ Press­knob­to­start. EXTRA DRY On coin-operated machines the duration of the HIGH TEMP. program is controlled by the coin/token inserted CHANGE TEMP.
  • Page 13: Error Codes

    Error codes Error codes A fault in the program or in the machine is indica- ted by an error message comprising an error code and a descriptive text. INCORRECT The drying program and the error code can PROGRAMMING be reset before restarting by holding in the knob for at least 10 seconds or turning off the power to the machine.
  • Page 15: Maintenance

    Machines with RMC Wipe off/clean drum and lifters with citric acid (Acidum citricum). If soap/softener residue re- mains, it is recommended also to use a coarse sponge. Lack of cleaning the lifters can reduce the au- tomatic residual moisture control in the clothes resulting in the clothes being moister than re- quested when the program has ended. Monthly, T4130 (on condensate machines) At least once a month the condenser must be cleaned of lint by rinsing it with water until the lamellae are clean. Soak in hot water if required. Quarterly/Semi-annually, T4130 • Check that the fresh-air intake at the rear of the machine is not clogged by lint or blocked in any other way. • Check that the evacuation system is tight and that the ducts are not clogged by lint or dust or blocked in any other way.
  • Page 16 Maintenance Daily, T4190 • Check that the drum stops when the door is opened. • Check that the machine will not start until the start button has been acti- vated. Monthly, T4190 Dryer with RMC Wipe off/clean drum and lifters with citric acid (Acidum citricum). If soap/sof- tener residue remains, it is recommended also to use a coarse sponge. Lack of cleaning the lifters can reduce the automatic residual moisture control in the clothes resulting in the clothes being moister than requested when the program has ended. Quarterly, T4190 Check that the following are not clogged by lint and dust or otherwise blocked: • Fresh-air intake on the back of the dryer. • Exhaust duct. • Fresh-air intake to the room (clean as required, depending on the oper- ating frequency). • Check that the evacuation system connection are tight. Quaterly/semi-annully, T4190 • For optimal function of the machine, it is important to check the filter. • The filter must be unbroken and free of lint. Annually, T4190 At least once a year the inside wearing parts of the machine should be checked by a competent, skilled person and cleaned of lint.
  • Page 17 A11 (2003) WN3..., N5... EN 61000-3-11 (2001) EXSM.X. EN 61000-6-2 (2005) WN3..., N4..., N5... EN 61000-6-3 (2007) N4... Försäkran om överensstämmelse EF-samsvarserklæring Electrolux Laundry Systems Sweden AB Electrolux Laundry Systems Sweden AB SE-341 80 Ljungby, Sverige SE-341 80 Ljungby, Sverige, försäkrar under eget ansvar att denna produkt, med typbeteckning och enl. ovan, är tillverkad i erklærer på eget ansvar at dette produktet, med typebetegnelse og produksjonsnummer som överensstämmelse med följande direktiv: angitt nedenfor, er produsert i samsvar med bestemmelsene i følgende direktiver:...
  • Page 18 W4.H. W41100H W4.H. W4280X EXSM.X. W4350X EXSM.X. W4600X EXSM.X. C240 H1... C260 H1... C240R H1... C260R H1... C290R H1... T4130 N1130.. T4190 N1190.. N1190.. T4250 N2... T4350 N2... T4300S N3... T4290 N4... Ljungby 2010.08.16 T4530 N4... T4650 N4... T4900 N4...
  • Page 19 Skrotning av maskin När maskinen inte längre skall användas måste den lämnas till en återvinningsstation för destruktion. Många detaljer i maskinen går att återanvända, men den innehåller även annat material som måste tas om hand på ett korrekt sätt. Lämna därför aldrig maskinen eller delar av maskinen i hushållsavfallet, eftersom det kan leda till hälsorisker eller skador på...
  • Page 20 Electrolux Laundry Systems Sweden AB 341 80 Ljungby, Sweden www.electrolux.com/laundrysystems Share more of our thinking at www.electrolux.com...

This manual is also suitable for:

N1130N1190T4190