Door Micro-Switch; Base Board - Electrolux 6 Series Service Manual

6.19 Door micro-switch

 Remove the frontal piece.
 Disconnect the connector.
 Lift the whole unit outwards.

6.20 Base board

 Loosen the 2 front screws.
 Loosen the rear screw on the right side.
 Using a pair of pliers, unhook the holding clips
on the left and right.
 When re-assembling, firstly insert the 3 lower
blocking hooks.
Technical Support - A.D.L. 44/66 599 74 32-54 Rev.01