4.8 Compressor cooling fan
Axial fan on ball bearings
Power supply voltage
Power consumed
Rotating speed rpm
Air flow at 2600 rpm
Air flow at 3000 rpm
4.9 Door micro-switch
The door switch makes it possible for the electric components to be powered after the door has been closed.
The switch is located above the door and it is closed, when the door itself is closed, by means of a pin
located on the door itself.
4.10 Steam generator tank LED light and level sensor
The LED lights and level sensor is positioned on the
left side of the tank containing the water necessary
to generate steam.
It consists of 5 LED diodes (1) which only light up if
you select a cycle that uses steam and a magnetic
switch (2) that is triggered by a float with a built-in
magnet found inside the tank.
Technical Support - A.D.L.
132-240V
50-60Hz
23W
2600/3000
2.32m³
2.72m³
1
22/69
2
599 76 86-51 Rev. 01