10
10
Door reversal
The door reversal illustrated below is on a
lefthinged door.
Reversing the door
• Disconnect the power to the dryer.
On the dryer
• Demount T-fi tting A and screw the screws
Fig
back into the same holes (in order to secure
1
the plate on the back).
• Disengage the door by carefully lifting it away
from the front. (Make sure to get a good grip
on the door - it is heavy).
• Demount the front panel.
• Demount T-fi tting A and B and mount on the
Fig
1
opposite side.
Fig
• Loosen cable hanger with cable and mount on
2
the opposite side. Strap the cable.
Fig
• Move door switch to the opposite side.
3
• Mount T-fi tting A at the bottom of the right
side.
On the door
• Move door handle to the opposite side, screw
Fig
screws into holes.
4
• Mount T-fi tting B at the top of the right side.
• Move ball lock in the door to the opposite side
without turning the lock, move cover plate.
On the dryer
•
Adjust the ball lock if required. Adjust the
door height using the T-pieces.
Start the dryer
• Reconnect the power to the dryer.
• Check that the door switch is working:
The drum must stop when the door is opened.
Door
1
2
3
4
A
B
B