Table of Contents
Advertisement
36
9 Reversing the door
Disconnect the power to the machine.
Demount the hinge (A) and refit the screws into the same holes in order to secure the panel on the back. Mount the
hinge (A) at the bottom of the opposite side.
Demount the door by carefully lifting it of the front.
Demount hinge (B).
Demount the top panel.
Cut the cable tie and remove cable (C) to the opposite side.
Demount the plastic cover with door switch (D) and mount on the opposite side.
Installation manual
fig.7660
fig.7657
Advertisement
Table of Contents
