Planet IGS-4215-16T2S User Manual page 92

•
Duplex
•
Flow Control
Buttons
: Click to apply changes.

Auto-10M – Set up 10M Auto negotiation.

Auto-100M – Set up 100M Auto negotiation.

Auto-1000M – Set up 1000M Auto negotiation.

Auto-10/100M – Set up 10/100M Auto negotiation.

10M – Set up 10M Force mode.

100M – Set up 100M Force mode.

1000M – Set up 1000M Force mode.
Select any available link duplex for the given switch port. Draw the menu bar to
select the mode.

Auto – Set up Auto negotiation.

Full - Force sets Full-Duplex mode.

Half - Force sets Half-Duplex mode.
When Auto Speed is selected for a port, this section indicates the flow control
capability that is advertised to the link partner. When a fixed-speed setting is
selected, that is what is used. Current Rx column indicates whether pause
frames on the port are obeyed. Current Tx column indicates whether pause
frames on the port are transmitted. The Rx and Tx settings are determined by the
result of the last Auto-Negotiation. Check the configured column to use flow
control. This setting is related to the setting for Configured Link Speed.
Figure 4-3-2: Port Status Page Screenshot
92
User's Manual of IGS-4215-16T2S