4.6.5 CIST Port Setting
This page allows you to configure per port CIST priority and cost. The CIST Port Setting and Status screens in
and
Figure 4-6-11
appear.
The page includes the following fields:
Object
•
Port Select
•
Priority
• Internal Path Cost
(0 = Auto)
Buttons
: Click to apply changes.
Figure 4-6-10: CIST Port Setting Page Screenshot
Description
Select port number for this drop down list.
Controls the port priority. This can be used to control priority of ports having
identical port cost. (See above).
Default: 128.
Range: 0-240, in steps of 16.
Controls the path cost incurred by the port.
The Auto setting will set the path cost as appropriate by the physical link speed,
using the 802.1D recommended values. Using the Specific setting, a
user-defined value can be entered.
The path cost is used when establishing the active topology of the network.
Lower path cost ports are chosen as forwarding ports in favor of higher path cost
ports. Valid values are in the range 1 to 200000000.
166
User's Manual of IGS-4215-16T2S
Figure 4-6-10