Measure Tire Pressure; Tire Wear Limit - KYMCO MXU 270i EURO Manual

Table of Contents

Advertisement

Measure Tire Pressure

Use the supplied low-pressure tire gauge (from the tool kit).
 NOTE: A low-pressure tire gauge ① is included as
standard equipment with your ATV. This gauge is
different than an automotive-type tire pressure gauge
because it can properly measure the lower pressures
used in an ATV tire. As you inspect the tire pressures,
make two readings and use the second reading to
determine if your tire pressure is proper or requires
adjustment. Dust, dirt or moisture in the gauge could
affect the accuracy of the first measurement.
PRE-RIDE INSPECTION

Tire Wear Limit

When the tire groove depth ② decreases to 0.16 in (4.0 mm)
due to wear, replace the tire.
 NOTE: To maintain proper handling of your ATV,
replace tires as a front-pair, or a rear-pair, or all four
tires at the same time.
42

Advertisement

Table of Contents
loading

Table of Contents