KYMCO MXU 270i EURO Manual page 38

SHIFTING: Neutral to Reverse, and Reverse to Park
1. Bring the ATV to a complete stop and return the throttle
lever to the closed position.
2. Apply the brake pedal.
3. Shift from neutral to reverse or from reverse to park, and
vice versa, by moving the select lever along the shift guide
to the desired drive mode.
 NOTE: When in reverse mode, the reverse indicator light
should be illuminated on the multifunction dis- play. If
it fails to illuminate, see your KYMCO dealer for
inspection or repair.
4. Before moving the ATV in reverse, check behind you for
people or obstacles. If clear, release the rear brake pedal.
5. Open the throttle lever gradually and continue to watch to
the rear as you back the ATV.
 NOTE: Operation in reverse differs significantly from
forward driving. Be careful and use small throttle lever
movements to maintain proper speed and control of the
ATV.
PRE-RIDE INSPECTION
POTENTIAL HAZARD
Improper operation in reverse.
WHAT CAN HAPPEN
You could hit an obstacle or a person behind you, resulting in
serious injury.
HOW TO AVOID THE HAZARD
When you shift into reverse, make sure there are no obstacles
or people behind you. When it is safe to proceed, go slowly.
33