7
DSC OPERATION
■ Entering the position and time
ADistresscallshouldincludethevessel'sposition,dateand
time.IfnoGPSdataisreceived,manuallyentertheposition
andUniversalTimeCoordinated(UTC)time.
NOTE:
• T hemanualentryisdisabledwhilevalidGPSdatais
received.
• The manually entered position and time is valid only for
23.5 hours, or until turning OFF the transceiver.
1.
Display the "POSITION INPUT" screen.
[MENU] > DSC Settings > Position Input
2. Enter the latitude.
TIP:
• S electanumberoracompassdirectionusing[▲]/[▼]/[◄]/
[►].
• S elect"←"or"→,"orrotate[DIAL]tomovethecursor.
• Push [ENT] or
20
FIN
to save the selected number.
3. Enter the longitude and the UTC time.
L See the TIP in step 2 to enter.
4.
Push
FIN
to set the entered position and time.
5. Push
to return to the standby screen.
EXIT
L The entered position and time are displayed on the
operating screen.