Table of Contents
Advertisement
1.5
INSTALLATION INSIDE THE RECESSED FRAME (OPTIONAL)
The unit is designed for installation inside the Immergas recessed frame (supplied as an optional extra) only in combination with the
oversized door kit that also contains the brackets for installation.
To install proceed as follows:
- for mounting the oversized door, please refer to the relevant instruction sheet
- Install the bracket (2) inside the recessed frame fixing it with the screws (3) in the pre-drilled holes (Fig. 4).
- Hang the boiler (4) to the bracket (2) (Fig. 5).
- Secure the boiler (4) by fitting the brackets (5) and fastening them with the relevant screws (6) and replace the door (Fig. 6).
The brackets (5) used to centre the appliance on the frame and hold it in place stop against the frame (1) so do not require fixing to the
frame itself.
An optional hose kit is available to connect the cyclonic filter supplied as standard. Contact the Immergas toll-free number or an Author-
ised Technical Service Centre.
3
2
5
6
4
2
3
2
4
5
6
1
1
1
4
5
6
17
Advertisement
Table of Contents
