Installation Inside The Recessed Frame (Optional) - Immergas Victrix Tera 28 1 Instructions And Warnings

1.5 INSTALLATION INSIDE THE RECESSED FRAME
(OPTIONAL).
The boiler is designed for installation inside the Immergas re-
cessed frame (supplied as optional). The necessary parts for this
type of installation (brackets) must also be purchased separately
as optional kit.
To install proceed as follows:
- Install the bracket (2) inside the recessed frame fixing it with the
screws (3) in the pre-drilled holes (Fig. 4).
- Hang the boiler (4) to the bracket (2) (Fig. 5).
- Block the boiler (4) by mounting the brackets (5) and fixing them
with their screws (6) (Fig. 6).
The brackets (5) used to centre the boiler on the frame and hold
it in place stop against the frame (1) so do not require fixing to
the frame itself.
10
3
5
6
4
2
3
2
4
2
5
6
1
4
1
5
1
6