Password-Protected Special Functions - Immergas VICTRIX MAIOR 28 Instructions And Recommendations

3.14 PASSWORD-PROTECTED SPECIAL FUNCTIONS

The appliance is equipped with some special functions, access to which is granted if this is in stand-by (
If the boiler is in summer, winter or in Stand-by mode from Remote control, the following functions are available:
- dI;
- Fu;
- tA;
- tM.
If the boiler is in Off mode from the boiler control panel, the following functions are available:
- SM;
- MA;
- dI;
- Fu.
RESET
RESET INFO
Once you have entered the menu, you can cycle through the following available functions by pressing the "INFO" button:
- Screed heater (SM) : only visible when the boiler is OFF;
- Maintenance (MA) : visible only with boiler OFF;
- Automatic venting (dI);
- Flue (Fu);
- Automatic calibration (tA) : only visible when the boiler is NOT in OFF;
- Manual calibration (tM): only visible when the boiler is NOT in OFF.
To select the function press the "MODE" button; to exit wait for the automatic end of the activated function or press the "RESET" button.
110
INFO MODE
MODE
Press and hold the "INFO" button for more than 5 seconds.
Two flashing single "-" lines appear on the display.
Now enter the password (
78
To enter the left digit use the knob (5) for adjusting the domestic
hot water temperature (
(6) for adjusting the central heating temperature (
Press MODE to confirm the password.
79
) or OFF.
) to access the programming menus.
), to enter the right digit use the knob
).