Table of Contents
Advertisement
1.5
INSTALLATION INSIDE THE RECESSED FRAME (OPTIONAL)
The appliance is designed for installation inside the Immergas recessed frame (supplied as optional). The bracket and support brackets
for installation are included in the accessory box.
To install proceed as follows:
- Install the bracket (2) inside the recessed frame fixing it with the screws (3) in the pre-drilled holes (Fig. 4).
- Hang the boiler (4) to the bracket (2) (Fig. 5).
- Block the boiler (4) by mounting the brackets (5) and fixing them with their screws (6) (Fig.6).
The brackets (5) used to centre the appliance on the frame and hold it in place stop against the frame (1) so do not require fixing to the
frame itself.
5
6
4
2
3
2
1
3
2
1
4
5
6
4
5
1
6
17
Advertisement
Table of Contents
