Replacing The Manifold Insulating Panel - Immergas VICTRIX MAIOR 28 Instructions And Recommendations

3.25 REPLACING THE MANIFOLD INSULATING PANEL

The operations described below must be performed after having removed the voltage from the
appliance.
1. To access the inside of the appliance, remove the casing as indicated in Paragr. 3.24.
2. Unscrew the 4 manifold fastening nuts (1, Fig. 95) and gently pull them out towards you at right angles.
3. Unscrew the fixing screws (6) of the ignition and detection electrode (5) and remove it.
4. Remove the insulating panel (1) by actuating a blade (2) under its surface.
5. Remove the residue of the fixing adhesive from the surface of the manifold (3).
6. Replace the insulating panel (1).
The new insulating panel, used as a spare to replace the removed one, does not need to be fixed with glue as its shape with the in-
terference on the burner ensures correct coupling with the manifold.
7. Refit the ignition and detection electrode (5) using the previously removed screws (6) and replace the relative gasket (4).
120
2
1
6
5
4
3
1
92