Casing Removal - Immergas VICTRIX MAIOR 28 Instructions And Recommendations

3.24 CASING REMOVAL

To facilitate appliance maintenance the casing can be completely removed as follows:
Lower grid (Fig. 87)
- Loosen the two screws (a);
- Press the hooks locking the lower grid (b) inwards.
- Remove the grid (b).
Front casing (Fig. 88)
- Loosen the screws (c).
- Pull the front casing (c) towards yourself from the bottom edge to release it from the control panel.
- Lift the front casing and remove it from the upper pins (e).
3
2
b
a
1
Reassembling the front casing.
Follow the instructions below to reinstall the front casing:
- Insert the front into the upper pins (e).
- Bring it to the end stop against the control panel.
- Open the door and press around the user interface area, ensuring that it engages with the control panel.
- Close the door and tighten the screws (c).
3
2
a
1
87
6
e
d
5
c
4
6
e
c
4
88
117